FEEDBACK LTD VP0230 |
|
NOTES | There are three 600-ohm outputs, each with their own fine
adjustment of phase. There is also a single coarse phase adjustment which
I assume sets the phase between each output. Since dealing with phase I assume these outputs are intended to be sine waves. There is a frequency control, plus additional external sync snsitivity which further suggests that the unit can either generate it's own waveforms or can generate waveforms locked (within limits) to a supplied waveform. So, what would we use such a piece of equipment for ? Er .. well ... um ... I'm sure I needn't insult your inteligence spelling it out. |
---|---|
SERVICE DATA | Nope. But then for something with such an obvious function I guess I don't really need one. |
CURRENT STATE | The odd dent in the case but its all there. I'm sure it'd perform its intended task particularly well. |
WHERE FOUND | Another donation saved from a rather baffled skip (thanks again Dave). |
Obviously, for a piece of equipment that is specifically
used for stuff previously described, we'll need a
fair few valves and power diodes. Obviously.
Page copyright © J.Evans 2004 |
CLICK HERE TO RETURN TO THE SIG GEN GALLERY |
Last updated 11th April 2004 |